Trainer Viknesh


  • i NARTE certified ESD Engineer (Certificate Number: ESD-00511-E)
  • Bachelor of Engineering (Electrical)- Universiti Teknologi Malaysia
  • Clean room design engineer
  • HRDC Certified trainer




Bahasa Melayu



Bahasa Melayu


Mr. Viknesh Selvaratnam is currently an ESD & Cleanroom consultant in one of the largest Contract Manufacture Company in Penang & Johor. He is an iNARTE Certified ESD Engineer and one of the first 28 individuals to receive this designation from the Electrostatic Discharge Association in Malaysia. He has a Degree in Electrical / Electronics. His experience in Electrostatic has been nearly 25 years with various exposures of manufacturing. He has about 30 years of working experience in manufacturing & cleanroom industries including wafer/silicon, semiconductor, electronics, and fiber optics.

The Training method and Approach used are to suit the needs of basic learners and that are using these skills for their daily work. He had understood these needs based on his experience and exposure of several companies in Malaysia. Most of the mistake that he had notice is that of a poor understanding of Basic Electrostatic Discharge and clean room environment controls cause of impact to daily manufacturing environment. He has conducted numerous trainings on ESD and clean room design for companies and has been consultant for few of the companies in guiding and establishing ESD implementation / Auditing and control/Clean room environment management, including technical application of ESD & Clean room models.

Been involved in Establishing ESD control program and clean room management for Contract Manufacture in Penang and Johor, been providing ESD training & clean room design consultation for Companies in Kuala Lumpur, Penang, Selangor, Ipoh, Negeri Sembilan, Melaka and Johor in Malaysia.





Provided consultation & training to:

  1. Flextronics Shah Alam Sdn Bhd (Tanjung Pelepas, Johor) –
    1. ANSI/ESD S20.20 Facility Certification & Preparation
    2. ESD Awareness & Internal Audit Preparation
  2. Sharp Manufacturing Corp (M) Sdn Bhd (Batu Pahat, Johor) – ESD Controls & Internal Audit consultation
  3. Zantat Sdn Bhd (Ipoh,Perak) – ESD Lime stone powder static charge Consultation
  4. M+W High Tech Industries (Kuala Lumpur) – Clean room design consultant
    1. Novugen (Bandar Enstek, Negeri Sembilan) – Clean room Pharma design consultation
    2. Infineon (Kulim, Kedah) – Clean room wafer plant design consultation
  5. Nexperia (Senawang, Negeri Sembilan) – ESD Controls Consultation
  6. Hitachi (Bangi, Selangor) –
    1. ESD Controls & Internal Audit Consultation
    2. ANSI/ESD S20.20 Facility Certification & Preparation
  7. Mercedes-Benz Malaysia Sdn Bhd (Pekan, Pahang) – ESD Intermediate Training
  8. Onkyo Asia Electronics Sdn Bhd (PJ, Selangor) – ESD Intermediate Training
  9. ASE (Advance Semiconductor Engineering) (Penang) – ESD Advance training
  10. Amkor (Banting, Selangor) – ESD Audit & ANSI/ESD S20.20 – 2014 Controls Consultation
  11. Iwatsum (Senawang, Negeri Sembilan) – ESD Intermediate Training & Consultation
  12. ITG Electronics Malaysia Sdn Bhd (Tampoi, Johor Bahru) – ANSI/ESD S20.20 – 2014 training
  13. Versa Manufacturing Sdn Bhd (Tampoi, Johor Bahru) – Basic ESD Control training
  14. Toyo Memory Technology Sdn Bhd (Kulim, Kedah) – Introduction to cleanroom maintenance, operation & design.
  15. Likom CMS Sdn Bhd (Taman Teknologi Cheng, Melaka) – ESD Awareness & Internal Audit Preparation
  16. Tanashin Sdn Bhd (Kawasan Perindustrian Air Keroh, Melaka)- ESD Advance Training
  17. Rohde & Schwarz (Shah Alam, Selangor) – Basic ESD training
  18. Yanfeng (Pekan, Pahang. Kulim, Kedah. USJ, Selangor. Bangkok, Thailand) –
    1. ESD Awareness Training
    2. Internal Audit Preparation
  • Internal Audit
  1. Wistron Technology (Malaysia) Sdn. Bhd. (Port Klang, Selangor) –
    1. Level 1: ANSI/ESD S20.20 Basic & Advance
    2. Level 2: ANSI/ESD S20.20 Standards & Measurement
  • Level 3: Internal Auditor ANSI/ESD S20.20 -2014
  1. ANSI/ESD S20.20-2014 Facility Certification & Preparation
  1. Dominant Opto Technologies Sdn. Bhd. (Melaka, Batu Berendam) – ELECTRO STATIC DISCHARGE (ESD)
  2. Carsem (M) Sdn Bhd (Ipoh, Perak) – ESD Program Manager & Cleanroom Engineer
  3. Stats ChipPAC (M) Sdn Bhd (Ulu Kelang, Kuala Lumpur) – ESD Program Manager & Cleanroom Engineer
  4. Finisar (M) Sdn Bhd (Ipoh, Perak) – ESD Program Manager & Cleanroom Engineer

He specializes in Electrostatic Discharge (ESD) & Cleanroom. He is an active member of Electrostatic Society America (ESA). He is also a HRDC certified Trainer.


  • na


  • na


  • na




No review yet.


Kindly sign-up or log-in to get access.


Login with your social account


Don’t have an account with us?


Sign Up to Bookmark your Favourite Course
or Request for a Quotation instantly

Sign in with your social account


By signing up, you agree to our Terms of Use and Privacy Policy

Have an account with us already?